Syncing Multiple Cameras using your Computer

This is part one of a three part series. In part one I will show you how to sync your cameras to your PC or Mac system clock. Part two will show you how to adjust the capture time of images shot in another timezone. In part three, I will show you how to how to sync the GPS metadata with your cellphone photos.

When complete, you will have georeferenced photos. Ready for Lightroom’s Map feature.

Why sync your camera’s time?

For one, its easer to identify photos when they have the correct time. If you have multiple cameras, then it will be convent to see all the photos you took in one location all grouped together.

Why should I sync my camera using my computer? Its easier, and if you are using a time-server then the time on your cell-home will also be the same.

How ofter should I sync my cameras? Well most camera don’t automaticlaly adjust for daylight savings time. So at a minimum at least twice a year—during daylight adjustments. Most camera’s clocks are not all that accurate and will tend to drift. I would recommend once a month. Well at least just before a big event, or photo-shoot. 

Well lets get started!

Software.

First off you will need to download and install the software to sync your camera. This is available on your camera’s web site.

For Nikon users you will need to download Nikon Transfer; it’s free from Nikon.

For Canon users you will need to download EOS Utility; it’s also free from Cannon.

Ensure your computer clock is using a time server.

This will ensure that your system time is correct. For PC double click your system clock, then click the Internet Time tab. From there you will be able to set your NTP (Network Time Protocol) server and timezone.

For PC double click your system clock, then click the Internet Time tab. From there you will be able to set your NTP (Network Time Protocol) server and timezone.

For Mac double click your system clock, then select “Open Date & Time Preferences.” Click the padlock at the bottom to unlock the settings. Then click the “Date & Time” tab. Ensure that the “Set date and time automatically” is checked 9qnmlmk. Then select a time server.  Click the padlock to lock again.

Connect your camera using a USB cable to your computer and sync.

Using the software you previously downloaded.

For Nikon users, launch “Nikon Transfer.”  Select the Preferences tab. Ensure that the “Synchronize camera datea adn time to comuter when camera is connected (supported cameras only)” is checked. Then click the Synchronize button.

For Cannon users, launch the “EOS Utility.” Then select “Camera Settings/Remote Shooting.” Your specific camera dialog will popup. Select the setup icon; third from the left, below shooting details. A “Date/Time/Zone Settings” dialog will pop. From there click the “From PC” button.

Now all your camera should be synced to the current time.

About Richard Cox

Profile

Speak Your Mind